Wire

Solid Wire Electrode for BA-S2 for Submerged Arc Welding

Classification:
EN ISO 14171-A (EN 756): S2
SFA 5.17 / AWS A5.17: EM12(K)

Datasheet English

Main Application

Wire electrode for submerged arc welding of non-alloy and fine grain steels, boiler steels and pipe steels.

Typical analysis and chemical composition acc. to EN ISO 14171-A and AWS A5.17

Wire electrodeCSiMnMoNiCrPSCu total
Typical analysis BA-S2 0.11 0.12 1.07 0.01 0.04 0.03 0.007 0.008 0.09
S2 acc. to ISO 14171-A 0.07 - 0.15 0.15 0.80 - 1.30 0.15 0.15 0.15 0.025 0.025 0.30
EM12 acc. to AWS A5.17 0.06 - 0.15 0.10 0.80 - 1.25 - - - 0.030 0.030 0.35
EM12K acc. to AWS A5.17 0.05 - 0.15 0.10 - 0.35 0.80 - 1.25 - - - 0.030 0.030 0.35

Base Materials

Non-alloy structural steels acc. to EN 10025 and ASTM: S235JRG2 / A570 Gr. 36 to S355J2G3R / A572 Gr. 50
suitable fluxes BF 1, BF 3 and BF 4

Fine grain steels acc. to EN 10025, EN 10028 and ASTM: up to P355N / S355NL / A516 Gr. 70
suitable fluxes BF 1, BF 3, BF 4, BF 5.1, BF 6.5 and BF 10

Pipe steels acc. to ISO 3183, EN 10208 and API-5: L415N / X60
suitable fluxes BF 5.1, BF 6.30 and BF 6.5

Boiler steels acc. to EN 10028 and ASTM: P235GH / A516 Gr.55, P355GH / A516 Gr. 70 and S275J2G3 / A572
Gr. 42, S355J2G3 / A572 Gr. 50
suitable fluxes BF 1, BF 3, BF 4, BF 5.1 and BF 6.5

Flux type suitability is strongly dependent on its application. In combination with the wire electrode the most suitable flux should match the requirements of the plate material as closely as possible under the existing welding conditions. Further information can be obtained from the technical flux data sheets.

Package Forms

Coils, spools, drums and spiders as standard package forms for SAW-wire electrodes, different package forms on request.

Diameter

2.0 – 5.0 mm; Sizes and tolerances acc. to ISO 544 and AWS A5.17.

Wire Electrode Surface

Copper-coated, smooth finish free from surface defects and foreign matter.

 

Go back