Wire
Solid Wire Electrode BA-WIRE 410 for Submerged Arc Welding
Classification:
EN ISO 14343-A: S 13
SFA 5.9 / AWS A5.9: ER410
Main Application
Wire electrode for submerged arc welding intended for welding 13% chromium steels.
Service temperatures up to +450 °C.
Typical analysis and chemical composition acc. to EN ISO 14343-A and AWS A5.9
| Wire electrode | C | Si | Mn | Mo | Ni | Cr | P | S | Cu total |
|---|---|---|---|---|---|---|---|---|---|
| Typical analysis BA-WIRE 410 | 0.10 | 0.4 | 0.4 | 0.2 | 0.1 | 13.0 | 0.015 | 0.015 | 0.2 |
| S 13 acc. to ISO 14343-A | 0.15 | 1.0 | 1.0 | 0.5 | 0.5 | 12.0 - 15.0 | 0.03 | 0.02 | 0.5 |
| ER410 acc. to AWS A5.9 | 0.12 | 0.5 | 0.6 | 0.75 | 0.6 | 11.5 - 13.5 | 0.03 | 0.03 | 0.75 |
Base Materials
1.4006 X12Cr13, 1.4021 X20Cr13
AISI 410, 420
Suitable fluxes: BF 38, WP 380
Flux type suitability is strongly dependent on its application. In combination with the wire electrode the most suitable flux should match the requirements of the plate material as closely as possible under the existing welding conditions. Further information can be obtained from the technical flux data sheets.
Package Forms
Coils, spools, drums and spiders as standard package forms for SAW-wire electrodes, different package forms on request.
Diameter
1.6 – 4.0 mm; sizes and tolerances acc. to ISO 544 and AWS A5.9.
Wire Electrode Surface
Smooth finish free from surface defects and foreign matter.