MIG
Solid Wire Electrode BA-MIG 625 for MIG/MAG Welding
Classification:
EN ISO 18274: S Ni 6625
SFA 5.14: ERNiCrMo-3
Main Application
BA-MIG 625 is a Nickel base solid wire electrode for GMAW. Suitable for welding INCONEL alloy 625, INCOLOY alloy 825, INCOLOY alloy 25-6Mo, alloy 20, welding the clad side of joints in steel with nickel-chromium molybdenum alloys, cladding steel with nickel-chromium molybdenum weld metal, surfacing of mild steel and for dissimilar welding’s of stainless steels to nickel alloys and carbon steels. The weld metal is high resistant to stress corrosion cracking and pitting. BA-MIG 625 is recommended for applications with operating temperature from cryogenic to +540 °C. In S-free atmosphere can be used up to +1200°C. Not recommended to use in the temperature range +600 - 850°C due to weld metal embrittlement.
Typical analysis and chemical composition acc. to EN ISO 18274 and AWS A5.14
| Wire electrode | Ni | Si | C | Cr | Mn | Ti | Fe | Nb+Ta | Al | Mo | S | P | Cu total | Others |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Typical analysis BA-MIG 625 | > 64 | 0.08 | 0.01 | 22.5 | 0.08 |
0.23 |
0.3 | 3.65 | 0.13 | 8.9 | 0.004 | 0.005 | 0.05 | - |
| S Ni 6625 acc. to ISO 18274 | > 58.0 | 0.5 | 0.1 | 20.0 - 23.0 | 0.5 | 0.4 | 5.0 | 3.0 - 4.2 | 0.4 | 8.0 - 10.0 | 0.015 | 0.02 | 0.5 | 0.5 |
| ERNiCrMo-3 acc. to AWS A5.14 | > 58.0 | 0.5 | 0.1 | 20.0 - 23.0 | 0.5 | 0.40 | 5.0 | 3.15 - 4.15 | 0.4 | 8.0 - 10.0 | 0.015 | 0.02 | 0.5 | 0.5 |
All - Weld Metal Mechanical Properties / Welding Data:
|
Heat Treatment |
As Welded |
|
|
Yield Strength Re, N/mm² (ksi) |
≥ 460 (67) |
|
|
Tensile Strength Rm, N/mm² (ksi) |
≥ 760 (110) |
|
|
Elongation A5 [%] |
>30 |
|
|
Impact Energy ISO-V, J (ft lbs) |
+20°C: ≥ 100 (74) |
-196°C: ≥ 47 (34) |
|
Current/polarity |
DC + |
|
|
Shielding Gas |
ISO 14175: I1 / I3 |
|
Werkstoffe
Alloy 625, alloy 825, INCOLY alloy 25-6Mo, alloy 20, 9% nickel steels, 2.4856, 2.4858, 2.4816, 1.4583, 1.4876, 1.4876, 1.4529, 2.4641, ASTM B 443, B 444, B 446 having UNS number N06625.
Package Forms
Spools BS300/15 kg, and drums as standard package forms for GMAW wire electrodes.
Diameter
1,0 - 1,2 mm; sizes and tolerances acc. to ISO 544 and AWS A5.14.
Wire Electrode Surface
Smooth finish free from surface defects and foreign matter.