Solid Wire Electrode BA-WIRE 410NiMo for Submerged Arc Welding
EN ISO 14343-A: S 13 4
SFA 5.9 / AWS A5.9: ER410NiMo
Wire electrode for submerged arc welding intended for welding martensitic 13% chromium-nickel steels. Also used for overlay mild and low alloy steels. Used in Turbines, Valve bodies, High pressure piping, Offshore, Power generation.
Typical analysis and chemical composition acc. to EN ISO 14343-A and AWS A5.9
|Wire electrode||C||Si||Mn||Mo||Ni||Cr||P||S||Cu total|
|Typical analysis BA-WIRE 410NiMo||0.03||0.35||0.4||0.6||4.5||12.0||0.015||0.015||0.2|
|S 13 4 acc. to ISO 14343-A||0.05||1.0||1.0||0.4 - 1.0||3.0 - 5.0||11.0 - 14.0||0.03||0.02||0.5|
|ER410NiMo acc. to AWS A5.9||0.06||0.5||0.6||0.4 - 0.7||4.0 - 5.0||11.0 - 12.5||0.03||0.03||0.75|
1.4407 (G-X5CrNiMo13-4); 1.4414 (G-X4CrNiMo13-4)
1.4313 (X4CrNi13-4); 1.4413 (X3CrNiMo13-4)
Suitable fluxes: BF 38, WP 380
Flux type suitability is strongly dependent on its application. In combination with the wire electrode the most suitable flux should match the requirements of the plate material as closely as possible under the existing welding conditions. Further information can be obtained from the technical flux data sheets.
Coils, spools, drums and spiders as standard package forms for SAW-wire electrodes, different package forms on request.
1.6 – 4.0 mm; sizes and tolerances acc. to ISO 544 and AWS A5.9.
Wire Electrode Surface
Smooth finish free from surface defects and foreign matter.