Solid Wire Electrode BA-WIRE 347 for Submerged Arc Welding
EN ISO 14343-A: S 19 9 Nb
SFA 5.9 / AWS A5.9: ER347
BA-WIRE 347 is a submerged arc welding wire intended for welding 18Cr/10Ni stabilized with Ti or Nb austenitic stainless steels, grades 321 and 347. Also suitable for the welding of similar unstabilized grades 304 or 304L. BA-WIRE 347 has high resistance to intergranular corrosion.
Typical analysis and chemical composition acc. to EN ISO 14343-A and AWS A5.9
|Wire electrode||C||Si||Mn||Mo||Ni||Cr||Nb||P||S||Cu total|
|Typical analysis BA-WIRE 347||0.05||0.4||1.4||0.1||9.8||19.5||0.60||0.015||0.014||0.1|
|S 19 9 Nb acc. to ISO 14343-A||0.08||0.65||1.0 - 2.5||0.5||9.0 - 11.0||19.0 - 21.0||10x%C > 1.0||0.03||0.02||0.5|
|ER347 acc. to AWS A5.9||0.08||0.30 - 0.65||1.0 - 2.5||0.75||9.0 - 11.0||19.0 - 21.5||10x%C > 1.0||0.03||0.03||0.75|
1.4550/ X6CrNiNb18-10, 1.4541/ X6CrNiTi18-10, 1.4552/ GX5CrNiNb19-11,1.4301/ X5CrNi18-10,1.4312/ GX10Cr-Ni18-8, 1.4546/ X5CrNiNb18-10, 1.4311/ X2CrNiN18-10, 1.4306/ X2CrNi19-11
AISI 347, 321, 302, 304, 304L, 304LN, ASTM A296 Gr. CF 8 C, A157 Gr. C9, A320 Gr. B8C or D
Suitable flux: WP 380
Flux type suitability is strongly dependent on its application. In combination with the wire electrode the most suitable flux should match the requirements of the plate material as closely as possible under the existing welding conditions. Further information can be obtained from the technical flux data sheets.
Coils, spools, drums and spiders as standard package forms for SAW-wire electrodes, different package forms on request.
1.6 – 4.0 mm; sizes and tolerances acc. to ISO 544 and AWS A5.9.
Wire Electrode Surface
Smooth finish free from surface defects and foreign matter.