Solid Wire Electrode BA-WIRE 308L for Submerged Arc Welding
EN ISO 14343-A: S 19 9 L
SFA 5.9 / AWS A5.9: ER308L
BA-WIRE 308L is a submerged arc welding wire intended for welding 18% Cr – 10% Ni austenitic stainless steels 1.4306 type 304, 304L. Suitable for service temperature from -196 °C to +350 °C.
Typical analysis and chemical composition acc. to EN ISO 14343-A and AWS A5.9
|Wire electrode||C||Si||Mn||Mo||Ni||Cr||P||S||Cu total|
|Typical analysis BA-WIRE 308L||0.02||0.4||1.8||0.1||10.0||20.0||0.020||0.013||0.1|
|S 19 9 L acc. to ISO 14343-A||0.03||0.65||1.0 - 2.5||0.5||9.0 - 11.0||19.0 - 21.0||0.03||0.02||0.5|
|ER308L acc. to AWS A5.9||0.03||0.30 - 0.65||1.0 - 2.5||0.75||9.0 - 11.0||19.5 - 22.0||0.03||0.03||0.75|
1.4306/X2CrNi19-11, 1.4301/X5CrNi18-10, 1.4311/ X2CrNiN18-10, 1.4312/ GX10CrNi18-8, 1.4541/ X6CrNiTi18-10, 1.4546/ X5CrNiNb18-10, 1.4550/ X6CrNiNb18-10
AISI 304, 304L, 304LN, 302, 321, 347; ASTM A157 Gr. C9; A320 Gr. B8C or D
Suitable fluxes: BF 38, WP 380
Flux type suitability is strongly dependent on its application. In combination with the wire electrode the most suitable flux should match the requirements of the plate material as closely as possible under the existing welding conditions. Further information can be obtained from the technical flux data sheets.
Coils, spools, drums and spiders as standard package forms for SAW-wire electrodes, different package forms on request.
1.6 – 4.0 mm; sizes and tolerances acc. to ISO 544 and AWS A5.9.
Wire Electrode Surface
Smooth finish free from surface defects and foreign matter.