Strip Electrode BA-STRIP 308L for Electroslag Overlay Welding
EN ISO 14343-A: B 19 9 L
SFA 5.9 / AWS A5.9: EQ308L
BA-STRIP 308L is a strip electrode for electroslag overlay welding (ESW). Mainly used as second layer to achieve a corrosion resistant overlay on a transition layer of BA-STRIP 309L on mild steel and low alloy steels.
Typical analysis and chemical composition acc. to EN ISO 14343-A and AWS A5.9
|Strip electrode||C||Si||Mn||Mo||Ni||Cr||P||S||Cu total|
|Typical analysis BA-STRIP 308L||0.01||0.4||1.8||0.1||10.0||20.0||0.020||0.013||0.1|
|B 19 9 L acc. to ISO 14343-A||
|0.65||1.0 - 2.5||0.5||9.0 - 11.0||9.0 - 21.0||0.03||0.02||0.5|
|EQ308L acc. to AWS A5.9||0.03||0.30 - 0.65||1.0 - 2.5||0.5||9.0 - 11.0||19.5 - 22.0||0.03||0.03||0.75|
Mild steels and low alloy steels.
Suitable flux: BF 44
Flux type suitability is strongly dependent on its application. In combination with the strip electrode the most suitable flux should match the requirements of the plate material as closely as possible under the existing welding conditions. Further information can be obtained from the technical flux data sheets.
Coils or wound spools as standard package forms for strip electrodes.
30 x 0.5 mm, 60 x 0.5 mm; sizes and tolerances acc. to ISO 544 and AWS A5.9.
Other dimensions on request.
Strip Electrode Surface
Smooth finish free from surface defects and foreign matter.