Strip Electrode BA-STRIP 2594NL for Electroslag Overlay Welding
EN ISO 14343-A: B 25 9 4 N L
SFA 5.9 / AWS A5.9: EQ2594
BA-STRIP 2594NL is a strip electrode for electroslag overlay welding (ESW). Used to obtain a UNS S32760 / UNS 32750 corrosion resistant overlay on mild steel and low alloy steels. The overlay has excellent resistance to stress corrosion cracking (SCC) in chloride-bearing environments and excellent resistance to pitting and crevice corrosion.
Typical analysis and chemical composition acc. to EN ISO 14343-A and AWS A5.9
|Strip electrode||C||Si||Mn||Mo||Ni||Cr||W||N||P||S||Cu total|
|Typical analysis BA-STRIP 2594NL||0.015||0.35||0.4||3.8||9.5||25.0||-||0.25||0.015||0.012||0.1|
|B 25 9 4 N L acc. to ISO 14343-A||0.03||1.0||2.5||2.5 - 4.5||8.0 - 10.5||24.0 - 27.0||1.0||0.20 - 0.30||0.03||0.02||1.5|
|EQ2594 acc. to AWS A5.9||0.03||1.0||2.5||2.5 - 4.5||8.0 - 10.5||24.0 - 27.0||1.0||0.20 - 0.30||0.03||0.02||1.5|
PREN > 40
50 FN according to WRC
Mild steels and low alloy steels.
Suitable flux: BF 44
Flux type suitability is strongly dependent on its application. In combination with the strip electrode the most suitable flux should match the requirements of the plate material as closely as possible under the existing welding conditions. Further information can be obtained from the technical flux data sheets.
Coils or wound spools as standard package forms for strip electrodes.
30 x 0.5 mm, 60 x 0.5 mm; sizes and tolerances acc. to ISO 544 and AWS A5.9.
Other dimensions on request.
Strip Electrode Surface
Smooth finish free from surface defects and foreign matter.